features/benefits
Protect your garden bench from thieves and vandals with this anchor kit suitable for installation into tarmac
Suitable for all outdoor timber furniture
Supplied with standard and tamper proof screws
Components: 2 x bench brackets, 2 x expanding rubber bolts, 4 x cross point screws, 4 x anti-vandal screws, 2 x security caps
installation
Tools required: 22mm masonry drill, 19mm socket and screwdriver.
1) check for underground services
2) the tarmac should a minimum of 100mm thick
3) if you are fixing the anchor kit yourself you will require a hammer drill with a 22mm masonry bit
4) first fix the bench brackets to diagonally opposite bench legs
5) predrill the wooden legs first with a drill bit smaller than the screws
6) fix the bench brackets with either cross point or vandal resistant screws
7) mark on the tarmac where the expanding bolts are to be drilled
8) move the bench aside
9) drill 22mm holes approximately 110mm deep
10) apply a little wd40 to the expanding bolts
11) push them into hole and unscrew/remove the bolt
12) move bench back into position
13) replace the bolts and tighten
delivery
For orders placed with a bench, this product will be delivered at the same time.
For orders placed for the accessory on its own, delivery period and cost is detailed here